Description

About

Add an elegant touch with this Silver Day and Night Blind
These sophisticated silver day and night blinds will certainly catch the eye. Thanks to its innovative design this blind allows you to either let the light in or shut down for some privacy. You can switch between trendy set of stripes and a solid block of colour by rolling it down and alternating the strips of fabric to move against one another.

These day and night blinds are made to measure and have a variety of options to choose from.

Features
Important Notes

Features

Bracket Type*: Top fix / Face Fix

Headrail Option: Open Frame / Covered Frame / Pelmeted Frame

Control Option: Hand Operated / Remote Control Operated

Decorative Additions: Blind with Border and Crystal Tassels / Blind with Border only

*Important Note – Day & Night blinds are supplied with universal brackets which provide options for both top and face fixtures. For a fitting inside your window’s recess, the minimum recess depth varies it depends on the chosen headrail option. Please refer to our Measuring Guide.

Important Notes

We make a 10mm deduction to the width and drop of your blind if ordered fitting type “inside recess”. This adjustment is made to enable the blind to fit within your window space.

If you wish to make your own allowances and do not require us to make any deduction, please select exact fitting and not recess during the order process.

Day & Night blinds are supplied with universal brackets which provide options for both top and face fixtures. For a fitting inside your window’s recess, the minimum recess depth varies it depends on the chosen headrail option. (Please read our Measuring Guide)

Delivery & Returns

Delivery:

FREE Standard Delivery on orders over £150. (UK Mainland only!)

We dispatch all Made to Measure/Made to Order orders within 2 - 6 weeks of purchase, whereas Standard products usually within 7 days of purchase, however, dispatch varies. For details, see individual items. We aim to reduce greenhouse gas emission through consolidated shipments where possible. For example, if you order a Standard product together with Made to Measure/Made to Order product, they will arrive together within 2 - 6 weeks of purchase.

When one of our courier partners has collected your order, we'll email you the tracking number and the link so you can track it all the way to the door. If the product arrives damaged, please notify us immediately, do not discard the packaging.

Returns:

All our Roman blinds, Day & Night blinds, curtains and other soft furnishings are made to order and we don’t stock ready-made products, therefore, once they are made, they are only suitable for your use. Your order cannot be cancelled or returned unless faulty or not made in accordance with your specifications.

If your product develops a fault we’ll repair or replace the product in accordance with the terms of the Consumer Rights Act 2015.

We're so confident in the quality of our products, we provide a free, 5 - year guarantee on all of our Roman blinds and curtains.

The below are not considered as faults and therefore cannot be repaired or replaced:

* Fabrics and dyes - normal fading
* Normal tear and wear
* Accident
* Alteration
* Exposure to elements
* Misuse
* Failure to follow measurement, installation, cleaning or maintenance instructions
* Fitted in a non domestic environment

Please do not hesitate to get in touch with our Customer Service if you have any problems whatsoever with one of our products.

Conditions of return:

Buyers are responsible for return postage costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.

Fitting Guide

Fitting Guide for Day & Night Blinds

Do You Need Professional Fitting Service?

Get in touch with Us

Things to Consider Before you Start Fitting

Before you get to work on fitting your new blinds, make sure you consider these factors:
• Is the surface that you’re fitting the blind onto an appropriate material?
• Do you have children and/or pets? If so, remember that the drawstrings on your blinds could be dangerous and cause accidents.
• Are there any obstructions that could hinder the opening and closing of your blinds? Once you’ve taken these things into account, you can get started on putting your new blinds in place.
• You will need: Electric drill, Screwdriver, Pencil

fitting-guide-for-zebra-blind

• Fitting components: L-hooks (for face fixing only), Clips (brackets), Screws&plug, Child safety P clip

fitting-components-zebra-blinds

Part 1: Fitting the brackets

Important Note - Day & Night blinds are supplied with universal brackets which provide options for both top and face fixtures. For a fitting inside your window's recess, the minimum recess depth varies it depends on the chosen headrail option.

Open Frame - minimum recess depth is 5cm

Covered Frame - minimum recess depth is 8.5cm

Pelmeted Frame - minimum recess depth is 7.5cm

Place the brackets where you would prefer your blind to hang, whether that’s inside or outside your window recess.
But keep in mind – if the width of your blind is longer than 150cm, you must add an extra bracket to the middle. If it is longer than 220cm, use two extra brackets with equal distances. Whichever one applies, your first and last brackets must always be positioned 5cm inside from both ends.

For Top Fixing (to the ceiling):

1-Position the brackets against the surface and make a mark out from the holes on the top of each bracket with your pencil.
2-Using your electric drill, make holes around 3cm deep with 6mm bid.
3-Secure the plugs into the holes.
4-Place the bracket on the plug and screw in using the screws provided.
Repeat the steps above for all of the brackets.

day-and-night-blind-bracket

For Face Fixing (to the wall or the window frame):

1 - Position the L-hook against the surface and make a mark with your pencil from the holes of the L-hook.
2 - Using your electric drill, make holes around 3cm deep with 6mm bid.
3 - Secure the plugs into the holes.
4 - Place the L-hook onto the plug and screw in using the screws provided.
5 - Repeat the steps above for the rest of the L-hooks.
6 - Place your bracket on the L-hooks in the same direction and turn it 90 degrees until it is fastened.

Part 2: Fitting the blind:

1 - Take your new blind and wind it up fully.
2 - Secure your blind’s headrail to both brackets, starting from back to front.
3 - Press up onto the headrail until you hear it click into place.
4 - Then, check your new blind is working as it should by pulling on its chain to fully extend it.

fitting-zebra-blind

Part 3: Fitting the safety device

1 - Find the lowest point of your blind’s hanging chain.
2 - Hook the chain onto the safety device, ensuring it securely holds the chain in place.
3 - Place the screws on top of the holes, and drill gently until they are fully in place and the device is securely attached to the wall.

child-safety-device-day-and-night-blind

WARNING!
The chains that operate the product can be dangerous for children and pets. Cords may wrap around a child’s neck. According to UK regulations, the chain must be mounted on the wall with a child lock. Move beds, cots and furniture away from window covering cords.

child-safety-first-blinds

Measuring Guide

How to Measure for Day & Night Blinds

First, decide where you want the blind to hang, this can be either inside the recess or outside of the recess.

Now check there are no obstructions inside or outside the window recess where the blind will hang, for example, look out for handles, part tiling, or windows that open inwards. If you need advice, call us or even send us a photo info@design-jr.com

Inside Recess Measurement (Recess Fit)

depth-inside-recess

Check your window recess is deep enough for the blind to fit inside. If no obstructions measure directly from the window frame to the edge of the recess. Make sure the recess depth is at least the number given below, otherwise it will not be able to accommodate the operating mechanism of a chosen frame design.

Open Frame Blind – 8cm

Covered Frame Blind – 10cm

Pelmeted Frame Blind – 10cm

Please consider any obstructions inside the recess such as handle, ventilation, or anything else and measure directly from them to the edge of the recess. Make sure the recess depth is at least the number given below, otherwise it will not be able to accommodate the operating mechanism of a chosen frame design.

Open Frame Blind – 11cm

Covered Frame Blind – 13cm

Pelmeted Frame Blind – 13cm

Step 1: Measure the width of your recess at three locations. The top, middle and bottom. Record the smallest measurement.

Step 2: Measure the drop of your recess at three locations. The left, middle and right. Record the smallest measurement.

Don’t make any deductions, we’ll make it for you to ensure your blind fits perfectly just give us the smallest numbers you have recorded for the width and drop.

If you have a partly tiled window recess in your kitchen or bathroom, in this case, the recess width should be measured between tiles.

Outside Recess Measurement (Exact Fit)

Decide how far you want the blind to overlap the wall.

Step 1: Measure the outside of your window recess from one side to another from the point you want. We recommend that overlap should be at least 7cm from each side, in order to minimise as much of external light as possible.

Step 2: Measure the outside of your window recess from the top to the bottom, from the height at which you want the cassette system to sit. It should be positioned at least 7cm above the window, down to the point you want the bottom bar to stop.

Warning!

Young children can be strangled by the loops in pull chains that operate this product. To avoid strangulation and entanglement, keep chains out of reach of young children. Chains may become wrapped around a child’s neck. Move cots and furniture away from window covering chains. child-safety-first-blinds

Need help? If you are still unsure about the measurements please contact us, and we will be happy to help. info@design-jr.com